Steam mops might have complicated features and unique shapes, but using them might not be that difficult. For longer life of your steam mops and for efficient cleaning of your home, office or other places you should definitely read this article. It will answer your most important question How To Use A Steam Mop Correctly?
Some steam mops come with several attachments but this should not be a cause for any worries. First of all, you need to clean the floor and ensure that there are no large particles on it.
If you are using a steam mop on your floor for the first time, always conduct a survey first before proceeding.
Another key point to consider is to ensure that the steam mop is not in contact with a particular area for a long period of time. This is because the mop is made of plastic which is susceptible and its functionality can be altered permanently.
Great care should be taken when using it on the laminate wooden floor as steam might cause damage to such floors. After using the steam mop, it is appropriate that you store it in a safe place away from direct heat or children.
Steam mops are available in many sizes and shapes. Some come with various attachments for many other applications besides just cleaning your flooring surfaces. Steam mops are generally considered more efficient and better to use than the usual more conventional mops.
Also when you use a steam mop to clean your floors a person only clean up the dirt but you really sanitize the ground getting rid of many kinds of unwanted organisms.
Contents
How To Use A Steam Mop Correctly?
How do Steam Mops work?
Compared to the conventional mop and bucket, a steam mop simplifies sanitizing hard surface floors. There’s no heavy bucket to drag around. Plus, there is no drippy mop to be wrung out, keeping hands clean and germ-free.
Steam mops work by using a jet of steam to remove dirt, grime, and kill germs and mites.
Steam mops have a reservoir which is filled with water and heated to above the boiling point to produce steam, usually at 12°C. The steam produced is then blasted out on through a microfiber pad to trap the moisture resulting in dry steam that does not damage your floors.
Some floors need to have multiple jets of steam and multiple layers of microfiber pads. As these pads soak the moisture which emanates from the steam, the dirt from the floor is drawn up by the pad and then absorbed. Along with removing dirt and grime, a steam floor cleaner disinfects without using any chemicals. The machine houses a small water tank that normally holds about 750 milliliters of water.
When plugged in, the tank heats the water to about 120° Celsius and begins to produce the hot mist. A microfiber pad placed underneath the jet where the vapor shoots out catches all the dirt and grime when it is set in motion.
In most models, the dirt seeps deep into the pad so that it doesn’t get drenched quickly. Also, these mops can also restore a surface’s shine by getting rid of residue.
A steam floor cleaner kills an estimated 99% of germs and household dust particles with strong, focused heat. Most stains will also disappear when a mop using only natural warm mist is used on the hard surfaces.
What Surfaces Can A Steam Floor Cleaner Sanitize?
A floor cleaner that only utilizes the natural elements found in hot vapor is both eco-friendly and designed to wash bare floors, such as ceramic tile, vinyl, laminate, marble, stone, and sealed hardwood. However, using this type of mop on waxed or certain un-waxed areas might result in diminishing the shine.
It was not created to clean unsealed wood. Before using it on these types of surfaces, it’s recommended to test an area that’s not noticeable or read the care instructions from the flooring manufacturer. General guidelines to use before cleaning your floors.
Guidelines for how to use a steam mop correctly
Below are some general guidelines for how to use a steam mop correctly while cleaning your floors.
Firstly Prepare The Floor
It is very important that you vacuum or sweep the floor to ensure that it can be free from any large particles. The microfibre clean pad is designed to pick-up only small particles and dirt.
Be very cautious where you Use It
If you are using a steam mop for the first time on your floors please pay attention to the surface on which you are using the steam mop.
Tiles – Just about all tiled floors are OKAY to use a steam cleaner on them due to the way tiles are manufactured.
Plastic – Floors that are covered with vinyl are also generally safe for steam cleaning but you have to make certain that the steam mop is not in contact with the same part of the floor for a prolonged period of time.
After all, vinyl fabric is a plastic and can be at risk of heating which can alter it permanently.
Laminate Wood Floor surfaces – This is where many users make a huge mistake and can often ruin a properly good wood that made the floor in an area so great care needs to be used before introducing vapor to laminate floors.
Just about all laminate floorboards are made up of a tough laminate surface glued to a jar that is made from pulped wood particles. The heat from the steam mop can affect the stuff composition of the ends and sore joints of the boards which can lead to cracks showing up and the moisture of the steam can affect the underside triggering the laminate to lift.
You can also check out steam mops for wooden floors.
Possess Sufficient Mop Pads
Mop pads attended down in cost within the last few years so keeping a good stock of them is now possible for most people.
Some individuals purchase a separate clean steam mop pad for every single of the floor surfaces that they regularly steam mop. Fortunately, they are washable and can last quite a long time if they are looked after properly. The cleaning of your floors is one of the duties that is carried out within a house deep clean that can be transported out by.
There are countless advantages of using a steam mop over the old mop and container of water. You must have thought or even gotten frustrated with how heavy the bucket of water was, or how much time it used to take to clean that one little spot of a spill on to the floor because you would have to clean the whole floor back because of it to not leave lines. steam mops are actually the solution to solve all the frustrations.
Get rid of the old mop and pail of water
With steam mops, you don’t have to carry a bucket of sloppy water while you clean. All you need to do is push a button and steam will come out. With one wipe you will see the spot comes clean.
You don’t have to worry about leaving streaks behind because they are designed to dry floor quickly, so water will not go into the floor and ruin it. They can be used on all floor types: marble, hardwood floor, laminate flooring, etc.
Some floors are really sensitive to chemicals, and you have to wipe the floor immediately after mopping.
Otherwise, you are at risk of ruining your floor. However, you don’t have to worry about that with steam mops because it dries the floor quickly, no water will be left behind after cleaning, and they are chemical free.
Safer Environment for Everybody
Like it was mentioned, steam mops are chemical free, so you don’t have to clean with different types of chemical.
Since the mops are using steam to clean, there are no unwanted chemicals that are severe to your floor or any chemical that might be left behind on your floors which happens commonly with the old traditional mob of water. The steam can be as high as 130° Celsius (266 F), so it kills bacteria and germs effectively.
They also prevent the growth of molds and mildew, and people with allergies are also using them to destroy and prevent dust mites and other potential allergens.
The regular traditional bucket of water will never give the same result because you are using the dirty water over and over again when you repeatedly dip the mop back to the same bucket of water.
Steam mops also give you a fresh scent after cleaning where the old mop only gives you chemical smell.
Steam Mops are Easy to Store
You can get rid of your old mop and the bucket from your closet and replace them with one steam mop because you no longer need the bucket of water.
You can even leave the solution in the solution tank for a few days and reuse it again later. You can also save money and space by using steam mops because there is no need of buying chemical cleaners and storing them at your house so that you can have a healthier environment for your children and pets.
They are easier to handle than the traditional style. With adjustable handle, you can even mop your floor sitting down. Therefore, you can have a healthier environment for children and pets with using steam mops because they kill germs effectively and chemical free.
How To Use A Steam Mop Correctly? [ Video ]
Buying the Right Steam Mop
The first decision you will need to make is whether to buy a couple of dedicated tools or an all in one machine. The problem I had with my all in one was how difficult it was to use.
It took too long to set up, it was cumbersome to use and needed time to dismantle.
I now use a dedicated steam mop which I fill with water, plugin and I’m away. I also have a portable hand steamer that will do every other job.
Next look for the features of the actual machine
You need a machine that superheats the steam to at least 20° C you need a machine that is easy to set up.
You can check out the best steam mops to buy in 2023.
This is a mop you won’t be handling it delicately, make sure the build quality is good.
A long cord will help speed through your work.
You won’t want the depth of the cleaner head to be high, the lower the depth, the easier it is to mop straight under your furniture.
It is a temperature that gives a steam mop its power. Temperatures above 200 degrees ensure that all bacteria are killed instantly. High temperatures will also melt away even the toughest grease and grime.
High-temperature steam also has less water content, so your floors dry very quickly to a streak-free finish some mops only heat to around 110 degrees, sure they will do the job but they will be more work, take longer and give poorer results.
The last thing I want to do is search for hoses and nozzles, put a machine together and then wait for the machine to heat.
My steam mop takes about 2 minutes to set up, and I can sanitize from the front door, through the hall across the kitchen and to my back porch in about 20 minutes!
Hope you’ve now got a pretty good idea of how to use a steam mop correctly. You can comment down your doubts, suggestions, etc. down in comment section.
Thank you and have a nice day.
Also, read
Steam Mop Black Friday Deals 2023
Vacuum Cleaner Black Friday Deals 2023